MicroTouch Systems FPD Touch Monitor Especificações descarregar pdf (Página 74)

Touch Controllers Reference Guide74

Reset

Syntax: <SOH>R<CR>

Description: Initializes the hardware and the firmware, causes the controller to stop

sending data, and recalculates the environmental conditions (for

example, stray and offset values). The Reset command also cancels

the Format Raw and Calibrate Raw commands and returns the

controller to normal operation.

MicroTouch recommends that the host system issue a Reset command

whenever the host system is powered on and is attempting to establish

communication with the controller.

Depending on the controller, the amount of time needed to execute a

Reset command ranges from 225 milliseconds to 800 milliseconds.

Therefore, the application program should wait and be sure it receives

the command response before issuing another command to the

controller following the reset.

Response: <SOH>0<CR> Positive response.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 120 121

Sem comentários

MicroTouch Systems FPD Touch Monitor Especificações Página 74